- All
- Product Name
- Product Keyword
- Product Model
- Product Summary
- Product Description
- Multi Field Search
 |
| Version: | |
|---|---|
| Tonnage: | |
| Usage: | |
| Original: | |
| Lead time: | |
| Material: | |
| Mold service: | |
30T
HD
8454301000
Item | Parameters | Name | Parameters |
Locking Force | 300KN | Motor Power | 5.5KW |
Tie Bars Inner Space | 345×295mm | Accumulator Capacity | 16L |
Moving Clamping Plate | 125mm | Vane Pump Working Pressure | 7.0Mpa |
Profiling Thickness | 110 – 190mm | Electric Heating Tube Power | 9.5KW |
Injection Pressure | 30KN | Heater Hand Power | 1KW |
Injection Stroke | 120mm | Oil Tank Capacity | 170L |
Dosage of Fluid Metal Per shot Pb） | 1000g | Machine Weight | ~2500Kg |
Crucible Effective Capacity（Pb） | 300Kg | Machine Dimensions | 170×90×250cm*2Parts |
Vane Pump | 30L/min |
This machine have separate 2 parts: one structure is hydraulic oil tank, accumulator, hydraulic valves, electronic control system and control panek. Another structure is melting system, injection system and molding system.
| No. | Check position | Check item | Check standard | |
| 1 | die-casting machine | machine environment | the machine is clean, and also clean the around of the machine | |
| 2 | security system | security door | no loose, run stably and reliably | |
| air cylinder of security door | air cylinder no leakage, piston rod no drags, and signal recption is good | |||
| 3 | lubricantion system | oil level of lubrication oil tank | between the top and bottom limitation | |
| lubrication effect | add machine oil at every lubrication position, and without oil leakage | |||
| 4 | hydraulic system | total pressure | work pressure is good, pressure shake doesn't influence normal work, oil pump without noise | |
| oil level of hydraulic oil tank | overwhelm oil gauge entirely | |||
| hydraulic oil temperature | between 55℃- -10℃ | |||
| oil valve, oil pipe | surface is clean, no loose, and no leakage | |||
| hydro-cylinder, piston rod | oil tank is no leakage, piston rod is no drags, and good connection | |||
| 5 | gas pressure system | pressure gage of atomized lubricator | 5-6Bar setting requires 5-6Bar | |
| ramming material air cylinder | air cylinder is no leakage, piston rod is no drags | |||
| the gas of ramming material air cylinder | no moisture | |||
| pressure gage of atomized lubricator | oil quantity keep between top and bottom limitation | |||
| 6 | mechanical system | tie bar ( draglink) | surface is clean, no drags, and no injury | |
| template | no injury, surface is clean | |||
| cross guide rod | surface is clean, no abrasion and drags | |||
| anti-loose | mode locking piston rod and cross hold-down nut is no loose, and steel pin set screw clamp spring is no loose | |||
| 7 | electric system | indicator light | indicator light of power, lubrication, running is on when working | |
| operation panel | button is good and fixed solidly | |||
| wire | be tied solidly and no damage | |||
| emergency stop switch | can cut off the motor power when press it | |||
| stroke switch | function of on-off is good, no greasy dirt, screw is no loose, pulley is no abrasion, probe is no breakage and no displacement | |||
| proximity switch | surface is clean, no loose and no displacement | |||
| 8 | hot work temperature | smelter temperature | adjust the temperature to 350℃ when start, and keep for 20mins, then adjust to working temperature | |
| nozzle head | lift the machine frame, and check if the nozzle head is leaking | |||
| 9 | cooling system | cooling pipeline | no water seepage | |
| Periodic table of maintenance | ||||
| serial no. | maintenance position | maintenance content | maintenance standard | maintenance period |
| 1 | lubricantion system | strainer, oil tank | wash by diesel | 2 months/time |
| lubrication pipeline, lubrication parts | lubrication pipeline is unimpeded, change damaged parts | 1 week/time | ||
| add engine oil into oil nozzle | add engine oil | 1 day/time | ||
| 2 | hydraulic system | hydraulic oil | sampling check | half year/time |
| hydraulic oil | change 1/3 hydraulic oil | 1 year/time | ||
| nitrogen pressure | no leaking | 1 week/time | ||
| oil cylinder sealing element | no oil leaking, no burn-in, and change the parts of burn-in (suggest to check and change before summer) | 1 year/time | ||
| strainer, oil tank | wash by diesel oil and check if there is damage | half year/time | ||
| oil pump | oil can come out normally, no abnormal noise | 1 year/time | ||
| piston rod, piston head, cylinder bush, oil valve | no galling, abrasion and fragmentation | 1 year/time | ||
| 3 | mechanical system | screw | fastening | 3 months/time |
| crank | steel bush, steel pin and crank is no abrasion (steel bush and steel pin should be changed every year) | 1 year/time | ||
| pulley wheel | no scratch and displacement | half month/time | ||
| mold adjustment device | no abrasion and work normally | half month/time | ||
| template copper bush | no abrasion | 1 year/time | ||
| cross guide rod, copper bush | no abrasion and galling | 1 year/time | ||
| parallelism of template | half year/time | |||
| coaxiality, verticality | 1 year/time | |||
| security door | can rotate and move easily | half month/time | ||
| steel band | no abrasion and galling | half year/time | ||
| 4 | electric system | stroke switch | change | 1 year/time |
| wire terminal | check and fasten all the wire terminals | 3 months/time | ||
| electrical appliance box | keep clean and no dust, no bare wire | 3 months/time | ||
| contactor, relay contact | no scorch and oxidation | 3 months/time | ||
| relay, time relay | change | 1 year/time | ||
| proximity switch | fasten screw and clean the dust | 2 months/time | ||
| motor | no shake and abnormal noise | 1 year/time | ||
| operation panel | check all the buttons if there is loose or damage | 2 months/time | ||
| 5 | hot work system | thermocouple | surface is no corrosion, if the temperature probe is good | half month/time |
| molten cup pressing plate | check if it is loose | 3 days/time | ||
| 6 | cooling system | pipeline | if it is leaking | 1 month/time |
| cooler | if it is blocking | half year/time | ||
| Name | Quantity |
| Shot Sleeve (Inject plunger) | 1pcs |
| Steel Piston Ring | 10pcs |
| Nozzle | 10pcs |
| Gooseneck | 1pcs |
| Nozzle Heating Circle | 1pcs |
| Wrench | 1pcs |
| LPG grab | 1pcs |
| Allen wrench | 1set |
| Heating Tube | 1pcs |
| Pliers | 1pcs |
More about 30T Vertical hot chamber die casting machine price, or die casting mould, please feel free to email us: cnkylt@aliyun.com We will choose suitable machine types, suggestions of mould design, provide free die casting samples.
Item | Parameters | Name | Parameters |
Locking Force | 300KN | Motor Power | 5.5KW |
Tie Bars Inner Space | 345×295mm | Accumulator Capacity | 16L |
Moving Clamping Plate | 125mm | Vane Pump Working Pressure | 7.0Mpa |
Profiling Thickness | 110 – 190mm | Electric Heating Tube Power | 9.5KW |
Injection Pressure | 30KN | Heater Hand Power | 1KW |
Injection Stroke | 120mm | Oil Tank Capacity | 170L |
Dosage of Fluid Metal Per shot Pb） | 1000g | Machine Weight | ~2500Kg |
Crucible Effective Capacity（Pb） | 300Kg | Machine Dimensions | 170×90×250cm*2Parts |
Vane Pump | 30L/min |
This machine have separate 2 parts: one structure is hydraulic oil tank, accumulator, hydraulic valves, electronic control system and control panek. Another structure is melting system, injection system and molding system.
| No. | Check position | Check item | Check standard | |
| 1 | die-casting machine | machine environment | the machine is clean, and also clean the around of the machine | |
| 2 | security system | security door | no loose, run stably and reliably | |
| air cylinder of security door | air cylinder no leakage, piston rod no drags, and signal recption is good | |||
| 3 | lubricantion system | oil level of lubrication oil tank | between the top and bottom limitation | |
| lubrication effect | add machine oil at every lubrication position, and without oil leakage | |||
| 4 | hydraulic system | total pressure | work pressure is good, pressure shake doesn't influence normal work, oil pump without noise | |
| oil level of hydraulic oil tank | overwhelm oil gauge entirely | |||
| hydraulic oil temperature | between 55℃- -10℃ | |||
| oil valve, oil pipe | surface is clean, no loose, and no leakage | |||
| hydro-cylinder, piston rod | oil tank is no leakage, piston rod is no drags, and good connection | |||
| 5 | gas pressure system | pressure gage of atomized lubricator | 5-6Bar setting requires 5-6Bar | |
| ramming material air cylinder | air cylinder is no leakage, piston rod is no drags | |||
| the gas of ramming material air cylinder | no moisture | |||
| pressure gage of atomized lubricator | oil quantity keep between top and bottom limitation | |||
| 6 | mechanical system | tie bar ( draglink) | surface is clean, no drags, and no injury | |
| template | no injury, surface is clean | |||
| cross guide rod | surface is clean, no abrasion and drags | |||
| anti-loose | mode locking piston rod and cross hold-down nut is no loose, and steel pin set screw clamp spring is no loose | |||
| 7 | electric system | indicator light | indicator light of power, lubrication, running is on when working | |
| operation panel | button is good and fixed solidly | |||
| wire | be tied solidly and no damage | |||
| emergency stop switch | can cut off the motor power when press it | |||
| stroke switch | function of on-off is good, no greasy dirt, screw is no loose, pulley is no abrasion, probe is no breakage and no displacement | |||
| proximity switch | surface is clean, no loose and no displacement | |||
| 8 | hot work temperature | smelter temperature | adjust the temperature to 350℃ when start, and keep for 20mins, then adjust to working temperature | |
| nozzle head | lift the machine frame, and check if the nozzle head is leaking | |||
| 9 | cooling system | cooling pipeline | no water seepage | |
| Periodic table of maintenance | ||||
| serial no. | maintenance position | maintenance content | maintenance standard | maintenance period |
| 1 | lubricantion system | strainer, oil tank | wash by diesel | 2 months/time |
| lubrication pipeline, lubrication parts | lubrication pipeline is unimpeded, change damaged parts | 1 week/time | ||
| add engine oil into oil nozzle | add engine oil | 1 day/time | ||
| 2 | hydraulic system | hydraulic oil | sampling check | half year/time |
| hydraulic oil | change 1/3 hydraulic oil | 1 year/time | ||
| nitrogen pressure | no leaking | 1 week/time | ||
| oil cylinder sealing element | no oil leaking, no burn-in, and change the parts of burn-in (suggest to check and change before summer) | 1 year/time | ||
| strainer, oil tank | wash by diesel oil and check if there is damage | half year/time | ||
| oil pump | oil can come out normally, no abnormal noise | 1 year/time | ||
| piston rod, piston head, cylinder bush, oil valve | no galling, abrasion and fragmentation | 1 year/time | ||
| 3 | mechanical system | screw | fastening | 3 months/time |
| crank | steel bush, steel pin and crank is no abrasion (steel bush and steel pin should be changed every year) | 1 year/time | ||
| pulley wheel | no scratch and displacement | half month/time | ||
| mold adjustment device | no abrasion and work normally | half month/time | ||
| template copper bush | no abrasion | 1 year/time | ||
| cross guide rod, copper bush | no abrasion and galling | 1 year/time | ||
| parallelism of template | half year/time | |||
| coaxiality, verticality | 1 year/time | |||
| security door | can rotate and move easily | half month/time | ||
| steel band | no abrasion and galling | half year/time | ||
| 4 | electric system | stroke switch | change | 1 year/time |
| wire terminal | check and fasten all the wire terminals | 3 months/time | ||
| electrical appliance box | keep clean and no dust, no bare wire | 3 months/time | ||
| contactor, relay contact | no scorch and oxidation | 3 months/time | ||
| relay, time relay | change | 1 year/time | ||
| proximity switch | fasten screw and clean the dust | 2 months/time | ||
| motor | no shake and abnormal noise | 1 year/time | ||
| operation panel | check all the buttons if there is loose or damage | 2 months/time | ||
| 5 | hot work system | thermocouple | surface is no corrosion, if the temperature probe is good | half month/time |
| molten cup pressing plate | check if it is loose | 3 days/time | ||
| 6 | cooling system | pipeline | if it is leaking | 1 month/time |
| cooler | if it is blocking | half year/time | ||
| Name | Quantity |
| Shot Sleeve (Inject plunger) | 1pcs |
| Steel Piston Ring | 10pcs |
| Nozzle | 10pcs |
| Gooseneck | 1pcs |
| Nozzle Heating Circle | 1pcs |
| Wrench | 1pcs |
| LPG grab | 1pcs |
| Allen wrench | 1set |
| Heating Tube | 1pcs |
| Pliers | 1pcs |
More about 30T Vertical hot chamber die casting machine price, or die casting mould, please feel free to email us: cnkylt@aliyun.com We will choose suitable machine types, suggestions of mould design, provide free die casting samples.
